Please be aware that Triumph has changed the alarm connector as of 2020, so this alarm will not be compatible with your bike.
Simple Plug & Play alarm for TRIUMPH motorcycles, fitting can be done within minutes. A special version of the HAWK X-50 motorcycle alarm system is supplied with a plug-and-play wiring loom for TRIUMPH motorcycles. In most cases, this alarm can be fitted in minutes using the supplied plug & play wiring loom.
Our Alarm system got built in unique Anti-Temper technology, nearly all motorbike or scooter alarms can be disarmed within seconds by short-circuiting one of the indicator lamps. With our system, it is impossible to so.
NOW WITH EVEN LOWER CURRENT CONSUMPTION (1.2mA) than the previous model, LOWER THAN LASERLINE, SPYBALL, OR ANY OTHER CHINESE ALARMS THAT MEANS IN ARMED MODE ALARM WILL NOT DRAIN YOUR BATTERY.
Eco- Mode for Long term parking virtually consumes ZERO current.
Secure override facility in the event of loss or damage to transmitters via personal pin code.
GENTLE SOFT TONE ARMING OR DISARMING CHIRP TO COMPLY WITH EU REGULATIONS (Will not scare your neighbor or your cat !!!, especially at night time)
HAWK® Motorcycle alarms products are also acknowledged by DIY installers as one of the easiest to install and all functions are controlled by onboard 8bit Microprocessor.
Will Fit The Following Models:
Before ordering the plug & play loom please make sure the appropriate plugs are fitted to you're bike as various models produced for some markets do not have them fitted, please do not ask us as the only way to find out is to actually locate them on your own bike before ordering.