Motorcycle Alarms + Immobiliser With Proximity Sensor

Our Alarm system got built in unique Anti-Temper technology, nearly all motorbikes or scooters alarm can be disarmed within seconds by short circuiting one of  indicator lamp. With our system it is impossible to so.

NOW WITH EVEN LOWER CURRENT CONSUMPTION (1.2mA)than previous model, LOWER THAN LASERLINE , SPYBALL OR ANY OTHER CHINESE MOTORCYCLE  ALARMS THAT MEANS IN ARMED MODE ALARM WILL NOT DRAIN YOUR BATTERY.

Eco- Mode for Long term parking virtually consuming Zero current.

Secure override facility in the event of loss or damage to transmitters via personal pin code.

We are only company on web to provide comprehensive wiring diagram for your bike in order to make job of installing your alarm much easier, it is provided free of charge at your request, see below for details.

HAWK® Motorcycle alarms products are also acknowledged by DIY installers as one of the easiest to install and all functions controlled by onboard 8bit Microprocessor. You only need to connect 3 wires to get alarm up & running. For advanced installation see supplied very easy to follow step by step install manual.

Here is a typical example of  wiring diagram

Power Supply - Connect the positive power supply wire of alarm system to the BLACK wire found in the white single connector that is located under the tail fairing, behind the tail light. Connect the negative power suppy wire of the alarm system to the BLACK wire found in pos. 2 of the white 4-way connector that is also located under the tail fairing , behind the tail light.

Engine immobilisation-Cut the BLACK wire bridge of the white 4-way connector that is sited under the fairing of the tail light, behind the tail lamp.

Ignition controlled positive supply - Connect to the BLACK/BLUE wire available in the yelllow 13- way placed behind the fairing of the left turn indicator, on the left of the headlamp.

Left & Right turn indicators- Connect to BLACK wire and LIGHT GREEN wire available in the loom placed under the seat , behind left fairing.

Remote Engine Start - Connect to YELLOW/BLACK wire available in the yellow 13- way connector placed behind the fairing of the left turn indicator , on the left of the headlamp .

This alarm works with any 12v machine including trikes and ATV's.

Motorcycle alarms is suitable for followings:
 
Aprila motorcycle alarms, Benelli motorcycle alarms , Beta motorbike alarms, Bimota motorcycle alarms, BMW motorcycle alarms, Buell motorcycle alarms, Cagiva motorcycle alarms, Derbi motorcycle alarms, Ducati motorcycle alarms, Gilera motorcycle alarms, Guzzi motorcycle alarms, Harley Davisdon motorcycle alarms, Honda motorcycle alarms,Hyosung motorcycle alarms, Italjet motorcycle alarms, Kwasaki motorbike alarms, KTM motorcycle alarms, Kymco motorcycle alarms, Malguti motorbike alarms, MBK motorcycle alarms, Morton motorcycle alarms, MV motorcycle alarms, Peugeot motorcycle alarms, PGO motorcycle alarms, Piaggio motorcycle alarms, Suzuki motorcycle alarms, SYM motorcycle alarms, Triumph motorbike alarms, Yamaha motorcycle alarms & many more.